• cut the evaporator outlet 1/4” poly tubing. Visit elkay.com/ezh2o to learn more about ezh2o bottle filling stati. Select the retrofit kit that is compatible with your unit in the list below the chart.
•Connect Bottle Filler Supply Line To Tee Fitting.
Select the retrofit kit that is compatible with your unit in the list below the chart. Remove the four screws located at the bottom of the cooler that secure the lower front panel. Activate the push bar to.
Elkay Bottle Filler Filter Replacement And Reset Filter Light Video.
2) add water supply to bottle filler: 6” from the evaporator outlet and insert the 1/4” tee fitting between the two pieces. Then add your retrofit kits to the cart and place your order.
Follow Russ, An Elkay Installer, As He Details How To Install An Ezh2O Bottle Filling Station.
Once you receive your retrofit kits, give us a call for support with your elkay drinking fountain with bottle filler installation. Apply plumber’s putty or silicone sealant to underside of grid strainer flange. Below is the elkay retrofit bottle filler reference chart.
Add Fixture Support Carrier If Wall Will Not Provide Adequate Support.
Turn the water supply back on; Activate the push bar to relieve the pressure in the water lines. Watch the video below to see how to replace the elkay bottle filler filter and also reset the filter light on an elkay lzwssm surface mounted bottle filling station.
This Will Send Water To The Bottle Filler Only.
Remove the lower front panel by pulling it straight down. We continue to expand our ezh2o bottle filling station offerings. Disconnect the drain trap and the water line.
Location:
Share :
Post a Comment
for "How To Install Elkay Bottle Filler"
Post a Comment for "How To Install Elkay Bottle Filler"